LOADING 3D…MATERIAL
PA12-CF10 (carbon-filled nylon)
REPLACED
Discontinued OEM — used assemblies from ~$2,000
WORKFLOW
Scan → CAD → Print
SERVICES
Broken part, discontinued part, or a brand-new idea — I'll build it.
3D scanning, reverse engineering, CAD, machining, sheet metal, electronics, and 3D printing under one roof. Send a photo of the part or a sketch of the idea — I'll turn it into working hardware.
Request a quoteRECENT WORK
Case studies
LOADING 3D…
LOADING 3D…CASE STUDY · 02
1200 A Breaker Panel
Sheet metal designed to be built, and to live outside
FULL CASE STUDY →CLIENT
Landco Power
RATING
1200 A breaker panel
STATUS
In manufacturing
HOW IT WORKS
From scan to part
The jet ski nozzle above started as a cracked original. Drag the handle to compare the raw 3D scan against the clean parametric CAD it became.
◂▸
RAW 3D SCAN — CRACKEDREBUILT CADWANT A CLOSER LOOK? SPIN THE FINISHED PART IN 3D →
ALSO DESIGNED
Parts designed for clients
Some of the one-off parts and assemblies I've designed and built for others — handles, brackets, adapters, enclosures, and more. Not everything I've made, but a good look at the range. Click any part for a closer look.
100 A Breaker Holder
Landco
Fuse Holder
Landco
Breaker Switch Tool
Landco
Spiderbox Breaker Tray
Landco
100 A Connection Ring
Landco
6-4 End Clamp
Landco
Edison Box Handle
Landco
Edison Box Handle — pivot
Landco
Fuel Spacer
Landco
RV Box Handle
Landco
Volvo Penta #3827640
Landco
RMS Installer
Landco
Distro Panel — center cut
Landco
Distro Panel — double cut
Landco
3/8" Stem → 3AN Adapter
Switch
3/8" Stem → 6AN Adapter
Switch
CAPABILITIES
What I can do
SVC-01
3D Scanning
Physical parts captured as accurate digital meshes — the starting point for reproducing parts that are broken, discontinued, or impossible to measure by hand.
SVC-02
Reverse Engineering & CAD
Scan data rebuilt into clean, parametric CAD — not just a copy of the mesh, but a proper model with design intent, tolerances, and room for improvement.
SVC-03
3D Printing
Functional parts printed, test-fit, and iterated fast. Material and orientation chosen for the load the part actually sees — not just what looks right.
SVC-04
CNC Machining & Fabrication
Not everything should be printed. CNC machining and sheet-metal fabrication, so the process is chosen to suit the part instead of the other way around.
SVC-05
Electronics & Embedded Systems
Hardware that has to think. Microcontroller and single-board systems, sensor integration, power distribution, and the code that ties them together — built and debugged as one thing, not handed off in pieces.
SVC-06
Prototyping & Product Development
Have an idea instead of a part? I take concepts from a sketch or description to working hardware — CAD designed from scratch, printed, tested, and iterated until it does the job.
START A JOB
Tell me about your project
Send a photo of the part — or a description of the thing you want to exist — and a sentence or two of context. I'll get back with whether it's a fit, a rough timeline, and a quote.
BASED IN PHOENIX, AZ · REMOTE JOBS WELCOME